Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Dallas Homeowners Choose Ghost Controls Gate Repair
Warden Gate Repair Dallas provides independent Dallas Ghost Controls service across the city, from Preston Hollow to Lakewood to Mesquite. We work on AXDP dual-gate systems, REX residential swing openers, TSS1 single-swing units, and DTP1 models daily, with model-specific bench knowledge most general repair outfits don’t have. We’re not authorized by Ghost Controls and we don’t pretend to be, but our techs know these boards, arms, and limit cams well enough to diagnose a TSS1 over the phone before rolling the truck. For same-week Ghost Controls service in Dallas, call (361) 322-4460.
Why Trust Warden Gate Repair Dallas for Your Ghost Controls Gate Repair?
Ghost Controls openers are built around specific torque curves and battery draw rates. When you swap in a generic board or an off-spec transformer, the opener might work for a month, then burn out a motor or drain the backup battery flat. We’ve seen it happen off Lemmon Avenue and up in Richardson. Our techs default to factory calibration spec for every Ghost Controls repair because these units are pickier than most homeowners realize.
Cole Rafferty, owner of Warden Gate Repair Dallas, cut his teeth at Los Angeles Trade-Technical College and spent nearly two decades repairing swing and slide gate operators before bringing that experience to Dallas. His philosophy on Ghost Controls work is simple: “Tell me what it’s doing wrong, and I’ll tell you what it costs to fix it – before I touch a thing.” Every Ghost Controls job gets a written price, a named tech with a photo sent before arrival, and the 365-Day Done Right Promise behind it. That promise means if your TSS1 limit switch drifts again or your REX board acts up within a year of our repair, the return visit is free.
The Threshold Standard applies to every visit: background-checked, identity-verified, photo-badged technicians, every time. You’ll know exactly who’s at the gate before you buzz them in.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Fix in Dallas
- Limit switch drift on TSS1 single-swing units. The TSS1 uses a cam-driven limit mechanism inside the arm housing. Repeated wind gusts off White Rock Lake or the open stretches around the Tollway slowly knock the cam out of position. The gate stops mid-travel or slams hard into the post. We reset the cam with a calibrated torque wrench and re-seal the boot so moisture doesn’t compound the problem.
- Moisture ingress in REX control board connectors. North Texas thunderstorms dump rain fast, and the humidity that follows gets into board housings through worn gaskets or cracked sealant. The result is intermittent remote response: the gate works fine for an hour, then ignores the remote entirely. We dry the board, clean the connectors, replace the gasket, and in some cases apply a conformal coating to the pins. If the board is already fried, we quote a REX control board replacement with the OEM part number before touching anything.
- Stripped taper hub on AXDP dual-gate split arms. On AXDP dual systems, the split arm connects to the gate leaf through a tapered hub. When an installer over-torques the retaining bolt, the taper strips and the gate starts to sag. You’ll see the two leaves drift out of alignment and the opener strain on every cycle. We replace the hub, re-align both leaves, and set the arm geometry back to factory spec. This one is common on heavy custom iron gates in Preston Hollow and Highland Park.
- Photocell false obstruction alerts on REX models. Dallas soil shifts with drought and rain cycles, and concrete walkways move. A photocell that was perfectly aligned at install gets knocked a few degrees out, so the REX beeps and refuses to close, convinced something is in the way. We re-align the photo eyes, check the wiring at the terminal block, and occasionally relocate the sensor to a more stable surface.
- Heat-stressed battery backups on all Ghost Controls series. Dallas summers push 100-plus degrees for weeks straight. Battery backups mounted in metal housings with limited airflow degrade faster here than in cooler climates. We see TSS1 and DTP1 units where the battery holds a charge for a few hours instead of a full day. We test the battery under load, then replace with a compatible sealed lead-acid or lithium unit sized to the board’s draw rate.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We default to OEM Ghost Controls parts: TSS1 arm assemblies, REX control boards, AXDP hub kits, limit cams, and transformer assemblies. These parts are engineered to work together within specific tolerance ranges, and mixing in generic boards with OEM motors is how openers get killed early. That said, if an OEM transformer is backordered, we’ll recommend a proven aftermarket unit with matching voltage and amperage ratings rather than leave your gate dead for a month.
Our repair-vs-replace math is honest and tilted toward repair. If the motor gear is intact and the control board hasn’t been fried, a $120 to $200 rebuild usually beats a $600 new opener. We’ll quote both paths with line-item prices so you can see the difference in writing. For most mechanical failures on Ghost Controls units, repair makes sense. For a board that’s been submerged or a motor that’s seized, replacement is the cheaper long-term play. We stock common Ghost Controls parts locally in our Dallas service vehicle, so most Gate Repair jobs don’t wait on shipping.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We start with your description of the symptom: when it happens, what it sounds like, what the gate does right before it fails. Then we inspect the specific Ghost Controls model on site. For a TSS1, that means pulling the arm cover and checking limit cam position and bolt torque. For an REX, we look at board connectors, photocell alignment, and the underside of the board for heat or moisture damage.
- 2
Written price. Before any work starts, you get a line-item price in writing. Parts, labor, and any diagnostic time are listed separately. You approve it or you don’t, and there’s no pressure either way.
- 3
Repair or replacement. We fix what’s broken using OEM-compatible parts, recalibrate the opener, and address the root cause, not just the symptom. On a stripped AXDP hub, we don’t just tighten the bolt; we replace the hub and re-align both gate leaves.
- 4
Testing and recalibration. We cycle the gate 10 to 15 times, adjust the force settings to match the actual gate weight, test the auto-close timer if you have one, and verify the photocells and safety edges interrupt properly. For battery backup systems, we simulate a power loss and confirm the opener runs on battery.
- 5
Warranty and the 365-Day Done Right Promise. Every repair gets a written guarantee. If the same problem comes back within a year, the return visit is free. That’s not a marketing line; it’s how we run the business.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Dallas
We service and install across the Ghost Controls residential opener line: the AXDP series for dual swing gates, the REX series for residential swing gates, the TSS1 series for single swing gates, and the DTP1 series for single swing applications. We stock common replacement parts for these units, including TSS1 arm assemblies, REX control boards, limit cams, transformer assemblies, and battery backup modules. If you’re replacing an old opener, we can supply and install a new Ghost Controls unit sized to your gate’s weight and cycle frequency, with a written quote before any work begins.
We Also Service These Brands
Ghost Controls is one of nine gate and opener brands we service across Dallas and Grand Prairie Ghost Controls service areas too. Our techs also carry parts and firsthand repair experience for LiftMaster, Mighty Mule, and DoorKing systems, among others. If you have a mixed-brand property or a second gate with a different opener, we can handle both on the same visit.
FAQs – Ghost Controls Gate Repair Service in Dallas
No. We’re an independent Ghost Controls service provider with factory-trained technicians and deep hands-on experience across the AXDP, REX, TSS1, and DTP1 series. We are not affiliated with or authorized by Ghost Controls, and we say so plainly so there’s no confusion. What you get is the same OEM parts and model-specific repair knowledge, backed by our own 365-Day Done Right Promise.
Yes, we default to OEM Ghost Controls parts, including TSS1 arm assemblies, REX control boards, and AXDP hub kits. OEM parts preserve the factory torque curves and battery draw rates that Ghost Controls engineers designed around. If an OEM part is backordered, we’ll recommend a proven aftermarket alternative with matching specs and tell you before ordering. Call (361) 322-4460 to discuss your specific model and what’s available.
Most Ghost Controls repairs are completed in one visit, typically within 60 to 90 minutes on site. A TSS1 limit switch reset can take as little as 20 minutes. A REX control board replacement with harness work might run two hours. We carry common parts in our Dallas service vehicle so we don’t have to schedule return trips for most jobs. We’ll give you a time estimate with your written price before work starts.
We service the AXDP dual-gate series, REX residential swing series, TSS1 single-swing series, and DTP1 single-swing series. That covers most Ghost Controls residential openers installed in Dallas and Ghost Controls in Coppell over the past decade. If you’re not sure which series you have, the model number is printed on the arm housing or the control board cover, and we can identify it from a photo.
If your Ghost Controls opener is still under manufacturer warranty, independent service can sometimes affect coverage depending on the terms and what was touched. We recommend checking your warranty documentation before any non-authorized repair. For units out of warranty which is most of what we see in Dallas this is a non-issue, and our own 365-Day Done Right Promise covers the work we do. We’ll flag any warranty concerns during diagnosis so you can decide before we proceed.
Ghost Controls gate repair in Dallas typically runs between $120 and $450, depending on the failure. A limit switch reset on a TSS1 is usually at the lower end, around $120 to $180. A REX control board replacement with OEM parts and labor typically lands between $300 and $450. An AXDP hub replacement with gate realignment usually runs $250 to $400. Every job gets a written line-item price before work starts, and estimates are free. Call (361) 322-4460 for an exact quote on your model.
On an AXDP dual-gate system, stopping mid-travel and reversing is usually a force-sensitivity trip or a limit timing issue between the two leaves. We see it most often when the taper hub on one split arm has begun to strip, making that leaf heavier to move than the board expects. The board reads the resistance as an obstruction and reverses. Other causes include photocell misalignment from shifting concrete or a failing battery backup that can’t maintain voltage under load. Our techs diagnose the specific cause on site, not over a guess.
Some generic remotes will pair with a REX opener if they operate on the same frequency and protocol, but Ghost Controls uses its own receiver logic, and compatibility is hit-or-miss. We’ve seen generic remotes pair successfully and then fail intermittently when the opener’s receiver sensitivity is set to factory default. A genuine Ghost Controls remote is the reliable fix, and we stock them in our Dallas service vehicle. If you’re set on a generic, we’ll pair it during the visit and test it before we leave.
After a North Texas storm, moisture ingress in the control board connectors is the most common cause of remote failure on a TSS1. The board still functions for manual operation, but the receiver section stops responding. We open the housing, dry the board, clean the connectors, and replace the gasket. If the board was damaged by water or a nearby lightning surge, we quote a replacement. Call (361) 322-4460 and we’ll walk you through a remote resync over the phone before scheduling a visit.
Yes, most Ghost Controls openers support a battery backup, either factory-installed or as an add-on module. In Dallas heat, expect a sealed lead-acid backup to last 18 to 36 months before it needs replacement. Lithium backups generally last longer but cost more. We test the battery under load during every Ghost Controls service call and quote a replacement if the runtime is below spec. A healthy backup should run your gate for eight to twelve full cycles after power loss.
Continuous beeping with a refusal to close on a REX model almost always points to a photocell issue: misalignment, a broken wire at the terminal block, or a photo eye that’s drifted out of position. Sometimes the beeping is a false obstruction reading from a sensor whose lens is caked with pollen or dust, which Dallas has plenty of. We clean the lenses, re-align the eyes, check the wiring, and test the safety edge for continuity. Most of these calls resolve in under an hour.
Book Your Ghost Controls Service in Dallas, TX
If your Ghost Controls opener is acting up, call (361) 322-4460. We’ll talk through the symptom, give you a straight answer on likely cause, and get a named tech with a photo scheduled to your Dallas home. Free estimates, written prices, and a live person on the line any hour of the day.
Written by Cole Rafferty, Owner at Warden Gate Repair Dallas, serving Dallas since 2008.