Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Dallas, TX
Hinge and post repair fixes the two structural anchors that keep your gate swinging straight and closing tight: the metal hinges that carry the gate’s weight, and the post (or column) those hinges are bolted into. When either one shifts, rusts, or loosens, the gate sags, scrapes the driveway, or stops latching. If you’re seeing that in Dallas, call our gate repair team at Warden Gate Repair at (361) 322-4460. We’ll send a background-checked technician whose name and photo you’ll have before they arrive, and you’ll get a written price before any work begins.
This is the work we do every day as part of our broader Gate Repair in Dallas service. Hinges fail slowly, then suddenly. A post that’s leaned two degrees in March can be on the ground by August, especially after a North Texas thunderstorm soaks the clay around the footing. Catching hinge wear early is cheaper than replacing a dropped gate, and it’s a lot safer than finding out the hard way at 6 a.m. when the gate won’t open.
Warden Gate Repair has done hinge and post work in Dallas since 2008, as part of the Threshold Group family. We work on gate hardware from FAAC, BFT, Linear, and Viking, among the brands we service, so the hinges, brackets, and post reinforcements we install match the loads those systems are built to handle. Every repair includes the 365-Day Done Right Promise: if the fix doesn’t hold, the return visit is free. That’s in writing, on every job, no fine print.
When You Need Hinge & Post Repair
Most hinge and post failures announce themselves before they become emergencies. Here’s what Dallas homeowners see in the weeks or months before a gate drops:
- The gate drags or scrapes the ground when you swing or slide it open. This usually means a hinge has elongated, a weld has cracked, or the post has begun to lean under the gate’s weight.
- The gate sits visibly crooked when closed, with a bigger gap at the top than the bottom (or vice versa). That misalignment is almost always in the hinge or post, not the gate leaf itself.
- The gate won’t latch or close all the way anymore. As hinges sag, the latch and receiver move out of line. Adjusting the latch without fixing the hinge just means you’ll adjust it again next month.
- You can see rust trails or flaking metal at the hinge pin or plate. In Dallas humidity and heat, this develops faster than most people expect, especially on older iron gates.
- The post moves when you push on the gate. Grab the gate at the latch side and pull. If the post flexes or shifts, the footing has weakened and the post needs full reinforcement or replacement before the gate falls.
- The gate suddenly sits lower on one side after a storm. Dallas clay expands when wet and shrinks when dry. That seasonal movement is hard on post footings, and a heavy thunderstorm can be the tipping point.
If any of these sound familiar, don’t wait. A sagging gate puts extra stress on the automatic gate repair opener (the motor that moves the gate), and replacing a burned-out motor on top of a hinge repair costs far more than fixing the hinge early. Call (361) 322-4460 and we’ll come look.
Our Hinge & Post Repair Process
Here’s how a hinge and post repair goes with Warden Gate Repair, start to finish:
- You call and talk to a real person. Our phone is answered live 24 hours a day, seven days a week. You describe what the gate is doing, and we schedule a visit at a time that works for you.
- You get the technician’s name and photo before we arrive. This is the Threshold Standard, and it’s on every visit, no exceptions. You’ll know exactly who’s coming to your door, and they’ll show photo ID when they get there.
- The technician inspects the hinges, post, and footing. We check each hinge pin and plate for wear, rust, and looseness. We check the post for any move at its base, and we evaluate the concrete footing or anchor condition. If the post is set in soil, we look for signs of erosion or water pooling around the base.
- You get a written price before any work starts. No ranges, no “it depends” after we’ve seen the job. The written price covers parts and labor, and it won’t change at the end. If you decide not to go ahead, you owe nothing for the visit’s diagnostic work.
- We repair or replace the hinge hardware, post, or footing, and test the gate. Depending on what we find, the repair might be welded hinge plates, a new heavy-duty hinge set, a re-anchored post, or a full post replacement with fresh concrete. Every job finishes with a cycle test: we open and close the gate manually and with the opener to make sure it’s balanced and latching.
- You get the repair guarantee in writing, backed by the 365-Day Done Right Promise. If the fix doesn’t hold within a year, we come back and make it right at no charge. That promise is standard, not an upsell.
Hinge & Post Repair Pricing in Dallas
Hinge and post repair in Dallas typically runs from $180 to $950, depending on what’s actually wrong. A simple residential hinge replacement with standard hardware usually lands between $180 and $400 per hinge or hinge set. A post that needs to be re-set with new concrete and reinforcement commonly runs $350 to $800. A full post replacement on a large driveway gate, where we’re cutting out the old post, digging and re-pouring the footing, and re-hanging the gate, can go from $700 to $1,200 or more, based on the gate’s weight and the post material (steel vs. wood vs. masonry).
What moves the price is the gate’s weight, the condition of the footing, and whether the hinges are welded or bolted. Heavier gates, rusted hardware, and water-damaged footings all add labor. If the post itself is fine but the hinges are shot, the job is faster and cheaper. If the post is leaning, there’s no shortcut, and we’ll tell you that plainly.
The estimate you get before work starts is a fixed, written price. That means the number on the page is the number you pay. No surprise line items at the end, no “we found more damage” add-ons. To get a free estimate for your specific gate, call (361) 322-4460 and describe what you’re seeing. We’ll give you a straight answer on the phone about what to expect, and the on-site written quote confirms it.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Dallas?
Most hinge only repairs in Dallas run $180 to $400, while post repairs run $350 to $800, and full post replacement on larger gates runs $700 to $1,200 or more depending on gate weight and footing condition. You’ll get a written, fixed price before any work starts, and that price never changes at the end. Call (361) 322-4460 for a free estimate on your specific gate.
Can you fix a leaning gate post without replacing it?
Often yes if the post itself is structurally sound and the problem is in the footing. We can dig out around the base, reset the post plumb with new concrete, and add reinforcement plates or brackets. If the post is rusted through, cracked, or severely bent, replace it. A leaning post is a safety issue, not just a cosmetic one: a gate that falls can cause serious injury, so leave the lock repair and structural work to a trained professional rather than attempting to straighten it yourself.
How long does hinge and post repair take?
Most hinge replacements done in under two hours on site. Post re-setting takes longer because the concrete needs curing time before the gate can hang, and a full post replace may be a same day job or require a next day return to re-hang the gate once the footing has set. You’ll get a clear timeline with your written estimate.
Which gate brands do you service for hinge and post work?
We work on gate hardware for FAAC, BFT, Linear, and Viking, among the brands we’re factory-trained to service. Hinge and post repair is independent of the opener brand in most cases, but knowing the system helps us match hardware to the loads the gate and motor are designed to carry. If your gate uses one of these systems, we likely have the right parts on the truck or can get them same day.
If your hinges are grinding, your post is leaning, or your gate just won’t sit right anymore, call Warden Gate Repair Dallas at (361) 322-4460. You’ll talk to a real person, get a technician assigned by name and photo, and get a written price before any work begins. We serve Dallas and the surrounding area with hinge and post repair backed by the 365-Day Done Right Promise. Learn more about our full range of services on our home page.
Written by Cole Rafferty, Owner at Warden Gate Repair Dallas, serving Dallas.