Driveway Gate in Dallas, TX

Sliding driveway gates

Wrought iron

Wood & steel frame

Farm & ranch

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Driveway Gate in Dallas, TX

A driveway gate does two jobs at once: it controls who gets onto your property, and it tells anyone watching that this home is not an easy target. At Warden Gate Repair Dallas, we plan, install, and service driveway gates of all types – swing, slide, and barrier arm – using equipment from FAAC, BFT, Linear, and Viking. If you need a new gate built from scratch or your existing one repaired, call (361) 322-4460 and you’ll talk to a live person, day or night. This page covers what we do, what it costs, and how the whole process works from first call to final walkthrough.

We’re the gate-and-opener specialist under the Gate Installation umbrella – which means we focus on one trade and one trade only. No handyman side jobs, no general contracting. Just gates: the steel, the motor, the sensors, the keypad, the whole system working as one. A warden is trusted to watch over a place and keep it secure. That is the entire idea behind a driveway gate, and it’s the standard we hold ourselves to on every job we take in Dallas.

When You Need Driveway Gate

Some people call us the day they close on a house and realize the gate doesn’t move. Others call us after a storm, after a break-in attempt, or after years of watching a gate that works “sometimes.” Here are the most common situations where a driveway gate needs professional attention:

• The gate motor runs but the gate doesn’t move. This usually means a broken drive chain, a stripped gear, or a failed coupling inside the motor housing – all repairable without replacing the whole system.
• You hear grinding, squealing, or clanking when the gate opens. Worn rollers, misaligned tracks, or a dry gearbox. Left alone, the noise becomes a full seizure and you’re looking at a much bigger bill.
• The gate sags and drags on the driveway. Common on wider swing gates in Dallas where summer heat causes metal fatigue at the hinge posts. We correct the sag and reinforce the post so it doesn’t come back next August.
• Your remote, keypad, or intercom system stops working. Sometimes it’s a dead battery. More often in Dallas, it’s a fried circuit board from a lightning-surge or a sensor knocked out of alignment by heavy winds.
• You want a gate where there isn’t one. New construction, a growing family, a security concern, or just the look of a gated entry. We handle the full installation: posts, gate fabrication, motor, safety sensors, and programming.
• Your gate closes on cars or people. This is a safety sensor failure and it needs immediate correction. Gate safety edges and photo eyes exist for a reason, and a gate that doesn’t stop when it should is dangerous.

Our Driveway Gate Process

Here is exactly how a driveway gate job works with us, whether it’s a repair or a full installation. No surprises, no mystery technician at your door.

1. You call and talk to a person. Our phone line is answered live, 24/7. You describe what’s happening with your gate. We ask questions about the gate type, the age, and the symptoms. Then we schedule a visit.
2. Your technician is named and photographed before arrival. Every Warden technician is background-checked, identity-verified, and photo-badged. Before we show up, you’ll receive the tech’s name and photo. At your door, they’ll present their photo ID badge. This is the Threshold Standard, enforced on every single visit.
3. On-site diagnosis and a written price. The tech inspects the gate, the motor (the box that slides or swings your gate automatically), the hinges, the track, the sensors, and the electrical feed. Then you receive a written price for the repair or installation – before any work starts. That price doesn’t change unless you change the scope.
4. The work. We arrive with the right parts for the brand you own – FAAC, BFT, Linear, Viking, and others. The work is done on the spot in most repair cases. Full installations take longer, and we’ll tell you the schedule before we begin.
5. Walkthrough and the 365-Day Done Right Promise. After the work, we test the gate through multiple full cycles, show you what we did, and answer every question. Then you get our written guarantee: if the repair isn’t right within 365 days, we return and make it right – free of charge. That’s the promise, in writing, on every job.

Driveway Gate Pricing in Dallas

Driveway gate repair in Dallas typically runs between $180 and $650 for most mechanical and electrical fixes, while full new driveway gate installations start around $3,800 and can reach $15,000 or more depending on gate size, material, and opener type. Here’s a breakdown of the common line items so you know the landscape before you call:

What moves the price? Gate width and weight are the biggest factors – a 16-foot steel slide gate costs far more to motorize than a single 8-foot swing leaf. Then there’s the existing electrical: if we have to run a new power line to the gate post, that adds labor and materials. Dirt and slope matter too. A gate on uneven Dallas terrain needs more site prep. And brand makes a difference: BFT and Viking hydraulics, for example, tend to cost more than basic Linear swing operators because of how they’re built.

We don’t give vague ranges and hope for the best. The written price you receive before work starts is the price you pay. If you want a real dollar figure for your specific gate, call (361) 322-4460 and we’ll tell you what to expect over the phone – free estimate, no obligation.

FAQs – Driveway Gate

How much does driveway gate installation cost in Dallas?

A new driveway gate installation in Dallas typically costs between $3,800 and $15,000, depending on gate size, material, whether it swings or slides, and the opener brand. Single swing gates on level ground sit at the lower end of that range; large slide gates with heavy steel and full automation reach the upper end. You’ll know your exact number after we inspect your site and give you a written price – call (361) 322-4460 and we’ll walk you through it.

Can you fix my driveway gate the same day?

In most cases, yes. We stock common repair parts and carry FAAC, BFT, Linear, and Viking components on our trucks. If your gate is stuck open, stuck closed, or grinding, call (361) 322-4460 and we’ll schedule the earliest available appointment – often the same day, especially for safety-critical failures like a gate that won’t close.

Is it cheaper to repair or replace my driveway gate?

Repair is almost always cheaper in the short run. A motor rebuild runs $180 to $480; a new gate and opener starts at $3,800. But if your gate is rusted through, sagging badly, or the track is severely bent, repeated patch repairs will cost more over two or three years than one clean installation. We’ll tell you honestly which way the math points – and you’ll see the numbers in writing before you decide.

What brands of gate openers do you work on?

We service FAAC, BFT, Linear, Viking, and the other major brands we’re factory-trained on. Our technicians carry brand-specific parts and programming tools, so your gate gets the correct component rather than a generic substitute. If you’re not sure what brand you have, describe the symptoms and we’ll identify it during the inspection.

Do you offer any guarantee on driveway gate work?

Every job comes with the 365-Day Done Right Promise: if the repair fails within a year, we come back and make it right – free of charge. It’s written into every work order. No fine print, no prorating. If the gate doesn’t work right, we don’t consider the job done.

Can you come today to look at my gate?

Call (361) 322-4460 and a live person will answer, 24/7. We’ll tell you the soonest time a technician can be at your door. If it’s urgent – a gate stuck open with no way to secure the property, for example – we prioritize those calls. And when your tech arrives, you’ll already know their name and what they look like.

Why Dallas Homeowners Choose Warden Gate Repair

Most gate companies send an anonymous truck. We don’t. Every Warden technician is background-checked, identity-verified, photo-badged, and introduced to you by name and photo before arrival. That’s the Threshold Standard, and it’s the reason people who think carefully about opening their door choose us – even when we cost a little more.

We’re local to Dallas, founded in 2008 as part of the Threshold Group family. Since then, our whole focus has been gate repair, electric gate repair, and gate motor repair. We’re not moonlighting as a fence company or a general contractor. If it’s a gate, it’s what we do. If it’s not a gate, we’re not your company.

And every job is covered by the written price and the written promise. No surprise add-ons when the bill comes. No “well, this part was more than we thought.” The number you approve is the number you pay. That’s the way it should work. That’s the way it works here.

Ready to talk about your driveway gate? Call (361) 322-4460 and tell us what’s happening. We’ll answer, we’ll listen, and we’ll give you honest answers about what it will take and what it will cost – starting with a free estimate. If you’re still exploring, learn more about our full Gate Installation in Dallas services or head back to the home page for an overview of everything we do.

Written by Cole Rafferty, Owner at Warden Gate Repair Dallas, serving Dallas.