Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Garland, TX
Garland’s gates work harder than gates in most North Texas cities. Flat terrain pushes wind straight across open lots, and decades of hot, humid summers have taken their toll on metal, hinges, and electronics. That combination keeps our Gate Repair in Garland crews busy year-round, from worn rollers on 1960s ranch-style driveways to wind-damaged operators near Lake Ray Hubbard. If your gate won’t open, sags off its track, or makes a grinding noise when the motor runs, call us at (361) 322-4460. We’ll send a named, photo-badged technician with a written price before any work starts.
Why Garland Homes Are Different
Most Garland homes were built between the 1950s and the 1990s, and many still have their original driveway gates. Those are long, sliding steel or iron gates on spacious lots, and they bring a specific set of problems: rollers that flatten over time, tracks that shift as the clay soil moves through wet and dry cycles, and posts that lean after decades of Texas storms. When a hailstorm or straight-line wind event comes through, we see gates peeled off their tracks, bent panels, and dead control boards in the same week.
The other big factor is wind. Garland’s flat, open terrain means there’s nothing to slow gusts before they hit a gate. A wind-rated operator and reinforced track aren’t upgrades here; they’re what keeps a gate working through spring storm season. Homes along the Lake Ray Hubbard shoreline get it worst. Custom iron gates facing the water are exposed to near-constant wind off the lake, which accelerates rust and wears out bearings faster than anywhere else in the city. We stock replacement bearings and marine-grade hardware for exactly those jobs.
Styles & brands we work with
Our Main Garland Services
Most calls to our Garland dispatch fall into one of three buckets: a gate that won’t slide or swing, a gate that moves but the electric side won’t respond, or a motor that runs but doesn’t turn the gate. Each has its own page with full pricing and local detail.
Gate Repair in Garland
Gate repair here usually means one of two things: a sliding gate that’s jumped its track or a swing gate that’s sagging on tired hinges. On Garland’s older ranch-style lots, long driveway gates put enormous strain on rollers. Add the soil shifting under a 60-year-old slab, and a gate that worked fine last summer can be dragging by spring. Our Gate Repair in Garland page covers typical failure points, what we fix on the first visit, and what a written repair quote includes. We bring backup rollers, track brackets, and hinge sets sized for the gates we see most often out here.
Electric Gate Repair in Garland
Electric gate failures are often electrical. Hail damage, lightning strikes, and power surges after a storm can fry a control board before you hear a thing. Garland’s summer thunderstorms roll in fast, and when they do, surge-damaged boards and receiver units make up a good portion of our calls. Our Electric Gate Repair in Garland page explains how we diagnose control boards, photo eyes, wiring, and safety loops. We troubleshoot on-site and quote the repair in writing before any part gets replaced.
Gate Motor Repair in Garland
A gate motor (the box that slides or swings your gate automatically) is a motor, a gearbox, and a control board in one housing. In Garland, we see gear failures on older motors that were never upgraded for wind load. A motor that worked fine when the gate was lighter will strain once a panel is dented or a bearing starts to bind. Our Gate Motor Repair in Garland page walks through motor testing, gear replacement, and what it costs to swap a failed unit. If the motor is beyond repair, we quote a replacement in the same visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Garland
We service and stock parts for the major gate and opener brands, including DoorKing, LiftMaster, and Mighty Mule. If your system runs on something outside our brands list, tell us when you call; we can usually source the right part within a day or two through our Dallas-Fort Worth parts desk.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Garland, TX
Garland homeowners want to know what a gate repair will cost before the technician shows up. These are the ranges we quote most often for this area.
| Service | Typical range in Garland |
|---|---|
| Gate roller or hinge replacement (sliding gate) | $180 – $340 |
| Track realignment and bracket replacement | $220 – $450 |
| Swing gate post reinforcement | $350 – $700 |
| Control board replacement (single gate) | $280 – $520 |
| Photo eye or safety loop replacement | $160 – $300 |
| Gate motor replacement (residential swing or slide) | $650 – $1,400 |
| Gearbox rebuild (chain-drive slide operator) | $300 – $600 |
| Full gate inspection with written condition report | $90 – $150 |
What pushes a Garland quote higher is usually the gate’s age and exposure. Original rollers on a 40-year-old gate often mean the track and brackets need attention at the same time; gates facing Lake Ray Hubbard can need bearing kits sooner than inland homes. Every quote is written, and you approve it before any work begins.
Neighborhoods We Serve in Garland
We send our Garland technicians across the city, from the established ranch-style subdivisions around the center of town to newer developments along the northeastern edge. Most jobs in Garland are reached the same day or next morning, depending on when you call.
- Camelot, near Lake Ray Hubbard, with the most wind and rust exposure
- Club Hill and the surrounding streets off Broadway
- Springpark and the neighborhoods just west of Firewheel
- The North Garland corridor near Belt Line Road and Arapaho
- Monica Park and eastern Garland near Centerville Road
Service Area – Cities Near Garland
Our Garland crews also take calls in the surrounding communities. We regularly serve Rowlett, TX on the lake’s eastern shore, Sunnyvale, TX just to the southeast, Balch Springs, TX to the south, and Dallas, TX along the shared western border. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Garland
Most Garland calls get a technician the same day or the next morning. We answer the phone live around the clock, so if your gate is stuck open and you need someone today, call (361) 322-4460 and we’ll give you a straight answer on timing.
Some Garland subdivisions have design review boards that need to approve a new gate before installation. For a repair on an existing gate, the HOA rarely needs to be involved. Call us and we’ll tell you what we’ve seen in your specific neighborhood.
Yes. Every job, including emergency repairs, gets a written price before any work begins. If a repair isn’t right, our 365-Day Done Right Promise covers a free return visit to make it right. That applies to every Garland job, no exceptions.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Garland Customers Say
"Good repair on our gate operator board. Waited a couple days for the board to arrive, but he checked in. Works perfectly now."
- Monica P."Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B.