Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rowlett, TX
Warden Gate Repair handles gate repair, electric gate repair, and gate motor repair across Rowlett, TX. Most of our Rowlett calls come from homeowners whose swing gates were installed with the house, built between the 1980s and early 2000s, and are now showing their age. The lake air around Lake Ray Hubbard accelerates rust on hinges and gate hardware, especially on the eastern shoreline side, which means Rowlett gates often need attention sooner than identical gates ten miles inland. If your gate is grinding, sagging, or refusing to open, call (361) 322-4460 and we’ll get a written price to you before any work begins.
Why Rowlett Homes Are Different
Rowlett’s housing stock is predominantly single-family homes from the 1980s through the 2000s, many with brick veneer and generous lots in master-planned communities like Springfield and Waterview. Those long driveway runs often mean custom swing gates with extended track spans or heavy ornamental steel frames. We see a lot of original gate openers still in service that are 20-plus years old and past their useful life.
The climate is the bigger factor. Hot, humid summers cause steel components to expand and contract repeatedly, which loosens bolts and stresses welds. Thunderstorms with high winds push gates against their stops, bending brackets and throwing sensors out of alignment. Power surges from lightning strikes are a common cause of fried circuit boards in gate motors throughout Rowlett. Properties closest to Lake Ray Hubbard, particularly in the Lakeside and Waterview neighborhoods, get the worst of it: lake-facing hardware rusts noticeably faster than the street-facing side. We can often date a gate’s original installation by the keypad wiring style in pre-2000 Springfield subdivisions. It’s the kind of local detail that comes from doing this work here, not from reading a spec sheet.
Styles & brands we work with
Our Main Rowlett Services
Most Rowlett homeowners reach out to us for one of three reasons: a gate that won’t open, an opener that’s dead, or a motor that runs but doesn’t move the gate. Each service has its own Rowlett page with pricing and repair details.
Gate Repair in Rowlett
Gate repair in Rowlett usually means rebuilding or realigning a swing or slide gate that’s sagging, dragging, or seizing up. The humidity and lake air here attack hinges, rollers, and welds faster than in neighboring cities. We replace bent brackets, rusted hinge pins, and warped track sections, then re-square the gate so it closes cleanly against the post. Long driveway runs common in Waterview mean heavier gates, and heavier gates punish worn hardware quickly. See Gate Repair in Rowlett for detailed pricing and what a typical repair visit includes.
Electric Gate Repair in Rowlett
Electric gate repair is what we do when the problem is electrical: a dead keypad, a photoelectric sensor knocked out by a storm, or wiring that’s been chewed through. Rowlett’s thunderstorm season brings power surges that damage control boards, and high winds push gates out of position just enough to trip safety sensors. We trace the circuit, replace damaged components, and test the full open-close cycle before we leave. See Electric Gate Repair in Rowlett for the full breakdown of electrical service options and costs.
Gate Motor Repair in Rowlett
The gate motor is the box that slides or swings your gate automatically. In Rowlett, we see a steady stream of motors that work intermittently or run but won’t move the gate, often because the internal gears have stripped or the capacitor has failed after years of humid summers. Whether you have a LiftMaster, FAAC, or Mighty Mule motor, we diagnose first, show you the written price, and repair or replace only what’s needed. See Gate Motor Repair in Rowlett for motor-specific pricing and common failure patterns.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Rowlett
We’re factory-trained on the brands Rowlett homeowners actually have: LiftMaster, FAAC, Elite, and Mighty Mule. Our trucks carry common circuit boards, remotes, and safety sensors for these brands, so most repairs don’t wait on parts. See our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rowlett, TX
| Service | Typical range in Rowlett |
|---|---|
| Service call & diagnostic | $49 – $99 |
| Gate hinge replacement | $150 – $350 |
| Gate wheel/roller replacement | $120 – $280 |
| Gate track repair or realignment | $180 – $450 |
| Gate opener circuit board replacement | $200 – $500 |
| Safety sensor replacement | $120 – $250 |
| Keypad replacement | $130 – $300 |
| Complete gate opener replacement | $700 – $1,800 |
| Full gate motor replacement | $600 – $1,500 |
| Annual maintenance visit | $120 – $180 |
Lakefront properties in Rowlett tend to run toward the upper end of these ranges because rusted fasteners and corroded brackets take longer to remove and often need more replacement parts. Whatever the number, you get it in writing before we touch a tool, and it’s the price you pay – no surprise line items at the end.
Neighborhoods We Serve in Rowlett
We cover all of Rowlett, from the lakefront streets to the newer subdivisions along the eastern side of town. Our scheduling is coordinated from the Dallas-Fort Worth office, and crews serve Rowlett locally with most service calls handled same-day.
- Lakeside
- Waterview
- Springfield
- Rowlett Creek
- Bayview
Service Area – Cities Near Rowlett
Warden Gate Repair also serves homeowners in Garland, TX, Sunnyvale, TX, Balch Springs, TX, and Dallas, TX. If you’re just outside Rowlett on the lake side or toward the county line, give us a call and we’ll confirm coverage.
Serving Rowlett, TX - Our Local Coverage Area
We’re based in the Rowlett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rowlett
We schedule most Rowlett service calls same-day or next-day. Rowlett is within our regular Dallas-Fort Worth dispatch area, and crews are routed locally. When you call, we’ll give you a confirmed arrival window, not a vague promise.
Some Rowlett communities, particularly master-planned ones like Springfield and Waterview, have architectural guidelines for front-facing gate changes. If your job involves more than a repair, we can advise on what to check with your HOA before work begins.
Yes. Every repair gets a written price before any work begins, with no added charges at the end unless you approve a change first. The estimate is free, and you’ll know exactly what you’re paying before you say go. For an exact quote, call (361) 322-4460 today.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rowlett Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Rusty chain drive got cleaned, lubed, and re-tensioned. He told me what to do each year to keep it going."
- Leon M.