Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Dallas Owner’s Guide

Ghost Controls keypad and intercom repair in Dallas typically runs $165 – $390 installed, depending on whether we’re replacing the keypad, the intercom module, or both. We stock Ghost Controls-compatible keypads and intercom parts on our trucks, so most Dallas-area repairs are done the same day. Owners usually catch the failure the same way: a keypad that takes three presses to register, a dead intercom speaker, or a gate that suddenly ignores every code except the one on the main remote.

Call (361) 322-4460

“Tell me what it’s doing wrong, and I’ll tell you what it costs to fix it, before I touch a thing.” That’s how Cole Rafferty approaches every Ghost Controls call in Dallas. You won’t get a vague estimate. You’ll get a written price, shown to you before the first screw comes out.

Which Ghost Controls Models This Applies To

Ghost Controls builds three main lines we see across Dallas: the AXDP and AXPD dual-gate kits, the R29 and TSS1 single-gate operators, and the Ghost Pro series with the heavier-duty solar options. The keypads and intercom modules are not interchangeable across all of them. The most common compatibility gotcha we hit is this: an AXDP system with a GPC2 control board needs a keypad wired for the four-terminal accessory block, while the older GPD board version runs a different communication protocol that the newer wireless keypads will not sync to. If you’re not sure which board you have, open the operator cover and read the label on the board itself. The model number is printed in the corner under the barcode.

When we replace a Ghost Controls keypad, we use either the OEM Ghost Controls unit or a quality equivalent from a manufacturer we’ve bench-tested, like the Model 020 keypad Ghost Controls designed for the R-series. Aftermarket universal keypads are cheaper up front, but they often don’t talk well to the board’s encrypted rolling-code receiver. For Dallas heat specifically, we favor OEM or sealed-unit aftermarket keypads with a UV-stabilized faceplate. The Texas sun eats cheap keypad membranes within two summers.

We also stock parts for LiftMaster, Mighty Mule, and DoorKing systems, so if you have a second gate or an older opener from a different brand, we can handle both in one trip.

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

• Keypad needs multiple presses or hard presses to register a digit. This usually means the silicone membrane under the keys has cracked from UV exposure or heat cycling. Dallas summers bake keypads mounted in direct sun, and the membrane is the first thing to go.
• One or two buttons work, but the rest do nothing. The carbon contact pads on the back of those specific keys have worn through. It’s not a programming problem. The keypad is mechanically failing.
• The intercom speaker crackles or cuts out mid-conversation. Moisture has gotten into the speaker housing or the wiring run to the operator. We see this after heavy rain seasons, especially on gates where the intercom wire runs through underground conduit that has shifted in Dallas clay soil.
• The gate opens fine with the remote, but the keypad code does nothing. The keypad’s transmitter has drifted off frequency or the rolling code sync was lost when the board was last reset. It may be repairable, or the keypad may need replacement.
• You hear a faint click from the operator when you press the keypad, but the gate doesn’t move. This means the keypad is working and the board is receiving the signal, but the relay that engages the motor is failing. That’s a board-level repair, not a keypad replacement.

Replacement Cost & What’s Included

Here’s what Ghost Controls keypad and intercom replacement costs in Dallas, including parts and labor:

• Single keypad replacement: $165 – $240 installed
• Intercom module replacement: $210 – $310 installed (wireless units cost more than wired)
• Keypad plus intercom replacement: $290 – $390 installed (discounted when done together)
• Board-level relay repair (if the board is salvageable): $140 – $220

What drives the range: whether your system is wireless or wired into the operator, whether the mounting surface is brick (which needs masonry anchors) or a standard post, and whether we need to pull new low-voltage wire through existing conduit. Every quote includes the part, the labor, the wiring terminations, and re-programming all existing codes and remotes to the new unit. You get one written price before we start, and it does not change when the job is done. If the repair isn’t right, our 365-Day Done Right Promise means we come back free and make it right.

DIY or Call Us?

There’s one thing you can safely check yourself: the keypad’s battery. Ghost Controls keypads with a 9-volt or coin-cell battery will act dead or erratic when the battery is low. Swap it out and test before you call. That fix costs you three dollars and five minutes.

Beyond that, we recommend a professional for one main reason: the Ghost Controls control board runs 12 – 24V DC through the accessory terminals, and a shorted wire during a DIY keypad swap can fry the board. A replacement board is $200 – $350, which turns a $165 keypad repair into a much bigger bill. The work also involves matching the keypad’s communication protocol to your specific board version, and the wrong match means a keypad that simply will not sync.

If you’d rather not risk the board, call us at (361) 322-4460. We’ll bring the right part, confirm the compatibility on the spot, and have your gate answering to you again the same day.

FAQs