Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Grand Prairie, TX
Gate repair in Grand Prairie comes down to one thing more than anything else: this city has a lot of older iron and aluminum gates that were built to last, but not built to standard. The tracks, rollers, and hinges on 1970s and 1980s ornamental gates don’t match what sits on a parts-store shelf today. That means a repair tech either knows how to fabricate a replacement on site or the gate stays broken. We know the difference, and we price it before we touch it. If your gate won’t open, won’t close, or is sagging against the latch, call (361) 322-4460 and we’ll give you a real number before any work starts.
Why Grand Prairie Homes Are Different
Grand Prairie splits cleanly between two housing eras, and each one fails in its own way. The central and north neighborhoods, built mostly in the 1970s and 80s, hold original ornamental iron gates with hardware that was custom-fabricated at the time. Thirty or forty years later, the rollers are worn, the tracks have rusted thin, and no universal part fits. A repair means measuring, cutting, and fitting a new piece on site. The newer subdivisions, mostly 1990s and later, lean electric: automated driveway gates, swing arms, and gate motors that bake in the Texas sun.
The climate works against every gate in this city. Grand Prairie summers push driveway surface temperatures past 120 degrees, and gate motors overheat, trip thermal protection, and refuse to run until the next morning. Severe thunderstorms knock out circuit boards, and the wind that comes off the open prairie misaligns cantilever gates a few inches at a time. Then there’s the soil. In the Dalworth and Westchester neighborhoods, aluminum gate posts sit in expansive clay that heaves with every drought and rain cycle. Posts lean, latches bind, and homeowners think the gate is broken when the ground moved under the post instead.
Styles & brands we work with
Our Main Grand Prairie Services
These three services cover nearly every gate call we run in Grand Prairie, and each one now has its own page with local pricing, specific repair details, and what to expect during the visit.
Gate Repair in Grand Prairie
Most calls from Grand Prairie start as a sagging gate, a latch that won’t catch, or a rolling gate that binds halfway. With the older iron that dominates the central parts of the city, the fix often means cutting out a seized hinge or fabricating a roller to match a track no parts house carries. We stock common track and hinge stock in the truck, but we also carry a welder and a grinder for the jobs that need it. The written price comes before the work, never after. For the full breakdown, see Gate Repair in Grand Prairie.
Electric Gate Repair in Grand Prairie
An electric gate that works fine in spring can shut down by July. In Grand Prairie, we see control boards cooked by humidity, photo eyes knocked out of alignment by storms, and transformers killed by lightning strikes close enough to the house to hit the low-voltage side. A call usually starts with a diagnosis, then a written quote, then the repair with parts we keep in stock locally. Read more about what we check and what it costs on the Electric Gate Repair in Grand Prairie page.
Gate Motor Repair in Grand Prairie
The gate motor is the box that slides or swings your gate automatically. In Grand Prairie, these motors fail two ways: heat and power surges. A motor that runs hot every afternoon for three months will eventually drop a capacitor or seize a gear. And when a storm knocks the power, the motor can come back wrong or not come back at all. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Details are on the Gate Motor Repair in Grand Prairie page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Grand Prairie
We carry parts and service documentation for FAAC, BFT, Linear, and Viking, along with five other major gate and opener brands. That coverage matters in Grand Prairie because many original builders installed FAAC and Viking operators in the 1990s, and BFT and Linear show up often in the newer subdivisions. Having the right part locally means a motor replacement usually happens in one visit instead of two. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Grand Prairie, TX
| Service | Typical range in Grand Prairie |
|---|---|
| Gate sag adjustment | $125 – $250 |
| Hinge replacement (pair) | $180 – $380 |
| Custom roller fabrication | $90 – $150 per roller |
| Gate latch replacement | $95 – $225 |
| Track realignment | $150 – $300 |
| Electric opener diagnostic | $85 – $150 |
| Gate motor replacement | $550 – $1,300 |
| Control board replacement | $250 – $700 |
| Photo eye realignment | $90 – $180 |
| Full gate replacement (single driveway) | $2,200 – $6,500 |
Prices in Grand Prairie run higher than the metro average when the gate is one of the older custom-fabricated iron jobs, because the labor involves cutting and fitting rather than bolt-on swapping. Newer standardized gates run lower. Every quote is written out in full, with every line item, before the first tool comes off the truck.
Neighborhoods We Serve in Grand Prairie
We run calls across the entire city, from the older central neighborhoods to the newer master-planned streets at the edge of town. The neighborhoods below represent the mix of housing stock and gate styles we work on most.
- Dalworth
- Westchester
- Lake Ridge
- Mira Lagos
- Nottingham
Typical response time in Grand Prairie is same-day or next-day, depending on the time of the call and the parts needed for the specific gate.
Service Area – Cities Near Grand Prairie
In addition to Grand Prairie, our crews run calls in several nearby cities. We serve Duncanville, TX, Dallas, TX, Coppell, TX, and Balch Springs, TX. If you’re on the edge of two cities, call and we’ll confirm coverage and a response window.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Grand Prairie
Most Grand Prairie calls are same-day or next-day, depending on the time of the call and the type of gate. Emergency calls, like a gate stuck open or a vehicle trapped behind a failing motor, get priority. Call (361) 322-4460 and we’ll give you an honest window, not a vague promise.
Most repair work, including motor replacement and hinge or track repair, does not require a permit in Grand Prairie. Full gate replacement may need HOA approval if a design standard applies in your subdivision. We can help you determine what applies before any work is scheduled.
Call us. A gate stuck open is a security issue, not just an inconvenience. We answer the phone 24 hours a day, and we’ll talk you through whether it’s safe to disconnect the motor and manually close the gate. If a motor or opener needs replacing, the written price comes before any work.
For a free estimate on any gate, electric gate, or gate motor repair in Grand Prairie, call (361) 322-4460. A real person answers, every time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grand Prairie Customers Say
"Rusty chain drive got cleaned, lubed, and re-tensioned. He told me what to do each year to keep it going."
- Leon M."Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K."Good repair on our gate operator board. Waited a couple days for the board to arrive, but he checked in. Works perfectly now."
- Monica P.