Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Glenn Heights, TX
Warden Gate Repair is the gate company Glenn Heights homeowners call when a driveway gate won’t open, a motor hums but nothing moves, or a post has shifted after a storm. Most of the work we do here falls into two worlds: newer automated gates in the subdivisions that keep expanding along I-35E, and older manual or chain-link gates in the unincorporated pockets on the city’s edges. The clay soil swells and shrinks with the weather, which throws posts out of alignment and puts stress on hinges and openers. Call (361) 322-4460 and you’ll get a real person, a written price before any work starts, and a technician whose name and photo you’ll have before they arrive.
Why Glenn Heights Homes Are Different
Glenn Heights sits in a part of North Texas where the soil moves more than people expect. Our hot summers dry out the clay, and spring thunderstorms soak it, and that cycle makes gate posts lean, shift, and twist over time. When a post moves even half an inch, an opener that ran smoothly for years starts binding, straining, and tripping its safety limits. We see this most after heavy rain, when homeowners find a gate that dragged on the ground yesterday and now won’t close at all.
In the newer subdivisions, most gates were installed when the home was built, and the openers are typically LiftMaster, FAAC, or BFT units that need a trained technician when they fail. In the older pockets around the city, we find more fabricated steel tube gates and chain-link setups that need welding and realignment rather than a simple part swap. The mix means no two Glenn Heights jobs look exactly alike, and we come prepared for both ends of that spectrum. We also account for the city’s growth pattern: new construction means new gate installs and opener wiring that sometimes needs correction, while established homes have equipment reaching the age where control boards start to fail.
Styles & brands we work with
Our Main Glenn Heights Services
Most calls we get in Glenn Heights come down to a gate that won’t move or a motor that’s making noise without doing its job. Here’s what each service involves locally.
Gate Repair in Glenn Heights
A sagging gate, a bent hinge, a latch that won’t catch, or a wheel that’s come off its track are all jobs we handle on site. In Glenn Heights, we often find the root cause is a post that’s settled in the clay, so we’ll straighten and brace it before re-hanging the gate leaf. We carry steel tube, hinge brackets, rollers, and welding equipment on the truck, so most repairs get done in a single visit. You’ll get a written price before we touch anything. Learn more on our Gate Repair in Glenn Heights page.
Electric Gate Repair in Glenn Heights
When a gate opener stops responding to the remote, keypad, or vehicle sensor, the fix usually involves diagnosing the control board, photo eyes, or wiring. Glenn Heights thunderstorms are a real culprit here: electrical surges from nearby lightning strikes damage control boards more often than people realize. We test the whole low-voltage circuit before replacing parts, so you don’t pay for a board when the actual issue is a severed wire in the conduit. See Electric Gate Repair in Glenn Heights for details.
Gate Motor Repair in Glenn Heights
The gate motor, the box that slides or swings your gate automatically, takes the brunt of a misaligned gate. In Glenn Heights’s clay soil conditions, we regularly see motors that have overheated from fighting a gate that’s no longer square in its track. We service slide and swing motors, replace stripped gears, and re-torque drive systems. If the motor is beyond saving, we’ll quote you a replacement before ordering anything. Full detail is on our Gate Motor Repair in Glenn Heights page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Glenn Heights
We’re factory-trained on FAAC, BFT, Linear, and Viking equipment, among other major brands. Our trucks carry common control boards, remotes, photo eyes, and safety edges for these systems, which means fewer return trips and faster turnarounds for Glenn Heights homeowners. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Glenn Heights, TX
| Service | Typical range in Glenn Heights |
|---|---|
| Gate won’t open or close (diagnostic + minor adjustment) | $85 – $175 |
| Hinge replacement (welded or bolted) | $150 – $325 per pair |
| Gate wheel or roller replacement | $75 – $190 per wheel |
| Post realignment with bracing | $225 – $500 |
| Control board replacement | $250 – $600 |
| Remote or keypad replacement/programming | $95 – $210 |
| Safety photo eye or edge sensor repair | $120 – $300 |
| Full gate opener motor replacement | $550 – $1,200 |
Prices in Glenn Heights run higher when a post has shifted badly enough to require excavation and new concrete, or when a lightning strike has taken out multiple components at once. You’ll always see the full written number before we begin, and that’s the number you pay.
Neighborhoods We Serve in Glenn Heights
We cover all of Glenn Heights and the surrounding communities. Our techs know the newer developments along the I-35E corridor as well as the older streets with semi-rural lots. Typical response time in Glenn Heights is same-day or next-day for most gate repairs, with a faster dispatch for emergency call-outs.
- Subdivisions along E Bear Creek Road and N Duncanville Road
- Newer developments near S Hampton Road and I-35E
- Older pockets and semi-rural properties near the unincorporated edges
- Neighborhoods around E Parkerville Road and S Interstate 35E
Service Area – Cities Near Glenn Heights
In addition to Glenn Heights, we serve the surrounding metro from our Dallas-Fort Worth office. Common neighboring areas we cover include Dallas, TX, Coppell, TX, Grand Prairie, TX, and Garland, TX. If you’re on the edge of Glenn Heights and aren’t sure whether we cover you, call and ask – if it’s within our dispatch radius, we’ll be there.
Serving Glenn Heights, TX - Our Local Coverage Area
We’re based in the Glenn Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Glenn Heights
Our local crews typically reach Glenn Heights homes the same day you call, and we get emergency requests out quickly. You’ll know exactly who’s coming before they arrive, along with a written price once the problem is diagnosed. Call (361) 322-4460 and we’ll tell you in plain terms.
Most repairs don’t need a permit, but if your property is in an HOA, check your covenants before modifying a gate that faces the street. We’ll handle standard repairs without you needing to involve the city, and we’ll flag anything unusual during the estimate.
Yes. We serve Glenn Heights plus the surrounding metro, including the unincorporated areas on the city’s edges. If you’re off a county road nearby, call us and we’ll confirm coverage and dispatch timing on the spot.
When your gate stops working in Glenn Heights, call (361) 322-4460. You’ll get a straight answer, a written price, and a technician you’ll recognize at the door.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glenn Heights Customers Say
"Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K."Good repair on our gate operator board. Waited a couple days for the board to arrive, but he checked in. Works perfectly now."
- Monica P."Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A.